• 글쓰기
• 목록

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are easy to maintain and durable, as well as long-lasting. In contrast to aluminium and timber, they are not susceptible to rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will help prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge deal of damage to your home, which can make it extremely dangerous and possibly fatal. It is important to ensure that your windows are in good condition.

For single pane windows it is fairly easy to replace windows, and the new one will usually fit inside the frame of the previous one easily. If windows with double glazed window repairs panes are joined by internal beading, it will be difficult to remove and replace the old panes. In this situation it is essential to purchase plastic spacers to make sure that the new pane fits into the window frame.

If you're planning to try to remove the glass panes yourself, it is essential to wear appropriate safety gear that includes gloves with a thick layer of material and eye protection. It is also an excellent idea to lay down a dropcloth before you begin working on the glass so that any shards fall onto the fabric instead of landing on the floor where they can be trampled on and cause further damage.

It's a great idea to seal the gap after the glass has been removed. This will prevent water and drafts from entering your home until a professional is able to repair the window repairs. It also acts as a barrier, deterring any intruders to gain access to your home. If the gap is large, you may be interested in an alarm door that comes with an integrated window, as this will offer the best of both worlds.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash window. However, over time, they are susceptible to a range of problems including sliding. A window that isn't properly aligned can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to lose its shape, it's crucial to act fast to stop the issue from becoming worse.

To fix a sagging window you can try to reposition the hinges. To accomplish this, you'll need open the window so that you can access the frame. You can then unscrew both the top and bottom hinges using a screwdriver, and then adjust them counter-clockwise or clockwise. Close your window to check the fit after you have repositioned your hinges. If you are happy with the fit of the window, tighten the screws to keep them in the right position.

If you are unable to reposition the hinges, you might require replacing the seal. Rubber seals can dry out and lose their elasticity with time, leading them to loose their elasticity. If this happens, it's crucial to replace the seal as quickly as possible so that your uPVC windows remain watertight and secure from draughts.

uPVC handles can also loosen up. This is typically caused by screws that have loosened over time, but it could also be due to the mechanism of the handle wears out. It's a good thing that it's simple to repair a loose uPVC window handle yourself. First, you'll need close the window and perform an experiment to ensure that it fits. The joints at the corners of the sash should be aligned with the joint on the casing. If it isn't, you can use a screwdriver or a wrench to loosen the handle and then turn the mechanism back into the position it was in.

3. Water Leaks

If you wake up to wet floors and damp walls each time it rains, it is important that you take action. The leaks of water from windows do are not just a cause for degradation of your home's structure but also hamper your efforts to control the temperature in your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be accomplished by any DIYer who is competent. Based on the severity of the issue the old caulking may require removal before a fresh layer can be applied. It is essential to keep in mind that when it is about uPVC window repairs, do not be tempted to 'over-caulk in order to make the area harder to clean and could reduce your energy efficiency.

Verify that the drainage holes do not have debris in them and that the sill pan is properly angled to drain away from the window. In more serious instances, you may need to think about replacing the window.

Mold spots and rotted sills are also signs of water leakage. The mold thrives in damp environments and can quickly spread throughout the home.

If the leakage is occurring between the double-glazed glass it is more likely the issue is with the seal than the frame. This can be easily corrected by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open, or if it blows open with the breeze. They can be replaced by any competent DIYer and are usually done within a few minutes.

Nearly every home in the UK will have top-hung or side-hung uPVC windows that have hinges and, just like any mechanical component they will wear out over time. It is essentially a very simple procedure, but it is easier if you have someone to help hold the frame up.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. You can check this by looking for the arrow on each hinge. This indicates the direction in which the window should open.

Window hinges that aren't working properly can be caused by incorrectly opening the window a certain manner or because of inadequate installation at the factory. This issue can be fixed by sending us a photograph through our website and we will be pleased to offer you advice.

Regularly lubricating hinges is also essential. Applying a light engineering lubricant on the hinges is a great method of doing this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more easily. It can also stop corrosion and decrease the chance of sticking. This is recommended to be done at least once a year. WD40 or other solvent-based oils should not be used as they could damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by different factors. Firstly the hinges, again due to wear and tear may become displaced, which will cause an opening to appear between the sash and the frame. If they are damaged beyond repair, it might be necessary to have them realigned. The interlock, which is located on the hinge of the window and can be misaligned. Again, it is feasible to give them a clean but in some cases it might be necessary to have them replaced.

The second most frequent cause of draughts is the window seals. These are prone to wear or damaged over time, and let air escape through the gaps. Installing high-quality weatherstripping is a good way to keep draughts at bay. Another alternative is to replace the window with glass that is low-emissivity, this will help to regulate indoor temperatures and will reduce the risk of draughts.

One of the most effective methods to reduce draughts is by using an draught excluder. These are typically fabric tubes filled with some sort of filler and can be placed on top of your windowsill. They will keep your home warm by blocking cold air.

Your windows made of upvc will continue to provide excellent insulation and security to your home with a little regular maintenance and repairs. It is important to remember that all windows will eventually get worn out and it is cheaper to replace them instead of fixing them. If you are having issues with your upvc windows, it's recommended to seek help from a professional as soon as you can.