• 글쓰기
• 목록

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they don't rust or rot.

It is essential to clean and oil UPVC doors and windows regularly. This will save you from unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home, and could even be fatal. It is important to make sure that your windows are in good condition.

For single pane windows it can be relatively simple to replace windows, and the new one will usually fit inside the frame of the previous one easily. However, if windows with double panes are secured by internal beading, it will be more difficult to take out the existing panes and install new ones. In this case it is essential to purchase plastic spacers in order to help the new pane fit into the window frame.

If you're planning to attempt to remove the glass panes yourself it is crucial to wear the proper safety gear that includes gloves with a thick layer of material and eye protection. You should also lay down a drop cloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not onto the floor which could cause them to be trampled under.

Once the glass has been removed and the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to stop drafts and water from entering the property until a professional is able to come out and repair the window. This will also act as a barrier, preventing any intruders from gaining entry to your home. If the gap between the door and the window is significant, you may need to consider a security screen that also includes an opening. This will provide the best of both.

2. Sagging

Upvc windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows with sash. However, over time they are susceptible to a range of issues like sliding. A sagging uPVC window can cause problems with light, draughts, and even security. It is crucial to act as soon as you discover that your upvc window repair near me windows are sliding.

To fix a window that is sagging you can try repositioning the hinges. You'll first need to open the windows to reach the frame. Then, you can remove the top and bottom hinges using a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've adjusted the hinges, shut your window and check for fitting. If you're satisfied with the fit of your window, tighten the screws to keep them in place.

If you cannot reposition the hinges, you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, which causes them to loosen. It is essential to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

UPVC handles can also loosen up. The majority of the time, this is caused by screws that have become loose over time. However, it can also happen because the handle mechanism has worn out. It's a good thing that it's simple to repair the loose uPVC window handle yourself. First, you'll need to shut the window and perform an experiment fitting. The corner joints of the sash must align with the casing joint. If it does not then you can use the screwdriver to loosen the handle. Then, turn the mechanism back into place.

3. Water Leaks

It is crucial to take action if wake up every morning to discover mouldy walls and floors that are wet. Water leaks from windows are not just a cause for degradation of your home's structure but also hamper your efforts to regulate the temperature in your home. The most common cause for leaking uPVC windows is that the sealant around the frame is either damaged or is missing.

This is a relatively easy fix that can be completed by any skilled DIYer. Depending on the severity of the issue the caulking used previously may need to be removed before a new layer can be applied. When it is time to uPVC repair, you must avoid 'over-caulking'. This will only make your window more difficult to clean and reduce its energy efficiency.

Check that any drainage holes have no debris in them, and also ensure that the sill pan has been properly angled to drain away from the window. In more serious instances, you might need to consider replacing the window.

Mold spots and rotted sills are another sign of water leakage. The fungus thrives in damp conditions and can spread quickly throughout the house.

It is also important to remember that if the leak originates from the glass of your double glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sagging. It is also possible to be fixed by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and blow open with ease, it may be hinges at the fault. Any competent DIYer can replace hinges in just a few minutes.

Like any mechanical part hinges are prone to wear out over time. It's easy to replace a hinge on a window, but it's simpler if you have someone to help you hold the frame.

It is also worth checking that the uPVC hinges are being opened and closed in the right direction. You can check this by looking for the arrow on each hinge, this indicates the direction in which the window should be opened.

The problem can be caused by opening the window improperly or by a poor installation at the factory. Sending us photos via our website is often enough to solve the issue. We are always happy to give suggestions.

It is also essential to ensure that the hinges are lubricated on a regular basis. Applying a light engineering lubricant to the hinges is a great method to accomplish this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also decreases the chance of windows getting stuck and stop corrosion. This must be done at a minimum every year. WD40 or other solvent-based oils should not be used as they could damage your uPVC windows.

5. Draughts

Draughts in upvc window repair near me windows can be caused by different things. Firstly the hinges, again due to wear and tear could become misaligned. This can cause gaps to develop between the sash and the frame. This can be easily fixed by giving them a good clean, but if they are beyond repair it might be necessary to have them aligned or replaced. The second is the interlock, which is located on the hinge of the window, can also become misaligned, again it is possible to give them a good clean, but in some cases it might be necessary to get them replaced.

These seals can wear down or be damaged over time, allowing air escape. Installing high-quality weatherstripping will help to keep draughts at bay. Replace the windows made of Upvc with low-emissivity lenses. This will help regulate indoor temperatures and decrease draughts.

One of the most effective ways to reduce drafts is to use a draught excluder. These are typically made of fabric which are filled with a type of filler. They can be put on the windowsill on top. These will help to keep cold air out and keep your home warm and cosy!

Your windows made of upvc will continue to provide excellent insulation and security to your home by performing regular maintenance and repairs. It is crucial to realize that all windows have a life span and there may come an point at which it is more economical to replace them than repair them. If you are experiencing issues with your Upvc windows, it is always best to seek professional assistance as soon as possible.