• 글쓰기
• 목록

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they do not get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home and even be fatal. It is important to take the time to make sure that you're doing all you can to ensure that your windows are in good shape.

Single-pane windows are fairly simple to replace, and they will usually fit into the old frames very easily. However If windows with double panes are secured by internal beading, it will be more difficult to remove the existing panes and install new ones. In this instance you'll need to source some plastic spacers that help the new pane to fit perfectly into the window frame.

Wearing eye protection and thick gloves is essential for anyone who plans to remove the glass by yourself. You should also lay down a dropcloth prior to you begin working on the window panes, so that any shards of glass fall onto the fabric and not on the floor, where they could be trampled under.

Once the glass is removed from the window, it's best to seal the gap with packaging tape or duct tape to prevent water and drafts from getting into the home until a professional can come out and fix the window. It also acts as a barrier that will prevent any intruders to gain access to your home. If the distance between the door and the window is large, you might prefer an alarm system that includes a window. This will give you the best of both.

2. Sagging

uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows made of sash. However, over time they are susceptible to a range of issues, including sliding. A window that is sagging can cause problems with light, draughts, and even security. It's crucial to act as soon as you realize that your uPVC windows are sliding.

Repositioning the hinges could help fix a window that is sliding. You'll first need to open the windows so you can access the frame. Then, using a screwdriver, you can take off the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and verify the an appropriate fit. If you're satisfied with the fit of your window, you can tighten screws to secure them in place.

If you are unable to move the hinges, you might have to replace the seal. As time passes, rubber seals lose their elasticity and become dry, which causes their tightness to decrease. If this happens, it's essential to replace the seal as soon as possible to ensure your uPVC windows are waterproof and draught-proof.

upvc window repair handles could also loosen. Most often, this is caused by screws that have become loose over time. However, it can occur because the handle mechanism has worn out. Luckily, it's not difficult to repair a loose uPVC window handle yourself. The first step is to close the window and then perform a test to ensure that it fits. The joint at the corners of the sash should be aligned with the joint on the casing. If it isn't then you can make use of a screwdriver to loosen the handle, and then reverse the mechanism back into position.

3. Water Leaks

It is essential to act if you wake up every morning to discover mouldy walls and wet floors. Windows that leak water do can not only cause destruction of your home's structure but also undermine your efforts to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a relatively easy fix that can be completed by any DIY expert. Depending on the severity of the problem is, the old caulking may need to be removed. It is essential to remember that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and can reduce your energy efficiency.

It is important to check that the drainage holes are free of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious cases you might need to consider replacing the window.

Other indicators of water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. This fungus thrives under conditions of dampness and can spread quickly throughout the house.

If the leakage occurs between the double-glazed glass, it is more likely that the problem is with the seal rather than the frame. A upvc window repair specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open, or if it blows open with the breeze. They can be easily repaired by any DIYer who is skilled and are usually completed in just a few minutes.

Nearly every home in the UK will have top-hung or side hung upvc window repair windows that use hinges and like any mechanical part they will wear out over time. Changing a window hinge is essentially a simple procedure, but it is easier when you have a person to assist in holding the frame up.

Make sure that the uPVC hinges are open and closed in the proper direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

The issue could be caused by opening the window improperly or a faulty installation in the factory. Sending us a photo via our website is often enough to resolve the problem. We are happy to provide assistance.

Regular lubrication of the hinges is also necessary. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also prevent corrosion and reduce the possibility of sticking. The ideal time to do this once a year. WD40 and other solvent based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a few various factors. First, the hinges due to wear and tear could become misaligned. This can cause an opening to appear between the sash and the frame. This can be easily repaired by giving them a good cleaning, but in the event that they are beyond repair it could be necessary to get them realigned or replaced. The interlock may also become unbalanced. This is located on the hinge's side, and may need to be cleaned. In some cases it is possible to replace these.

The next common reason for draughts is window seals, these are prone to wear or damaged over time and allow air to escape through the gaps. Replacement of these with high-quality weatherstripping can help prevent draughts. Another alternative is to replace the upvc window with glass that is low-emissivity, this will help in regulating indoor temperatures and will reduce the risk of draughts.

The final method to cut down on the amount of draughts is to use a Draught-excluder. These are usually fabric tubes filled with a filler which can be put on top of your window sill. They will keep your home warm by blocking cold air.

With a little regular maintenance and repair windows made of upvc will provide an excellent level of security and insulation for your home. It is important to remember that all windows will eventually become worn out, and it is more cost-effective to simply replace them rather than repair them. If you are experiencing issues with your Upvc windows, it is always best to seek professional assistance as soon as you can.