• 글쓰기
• 목록

Protect Your Pride And Joy With The Ghost Immobiliser

Secure your prized possessions against theft by using the Ghost Immobiliser. It's discreet and does not require additional key fobs to operate.

The device makes use of the buttons on your vehicle (steering wheel doors, door panels, and the centre console) to create a unique changeable pin code sequence that can be up to 20 presses long. This allows your vehicle to begin.

Simple PIN code Change Process

With the increasing rate of vehicle thefts, many owners are looking to improve their security. There are many different types of security gadgets that are sold aftermarket that range rover sport ghost installer from tracking systems to alarms and immobilisers. However, not all of these are equally effective in protecting your car. A tracking system may aid in finding your vehicle if it's stolen however, it won't stop the crime. Immobilisers, on the other hand does exactly what it says on the tin: it disables your car's engine so that it cannot be started. The Autowatch Ghost is one of the most sophisticated options available, making it almost impossible for thieves steal your car.

Using the existing buttons in your car, the ghost device creates an exclusive sequence that has to be entered prior to the engine starts. This can be done by using the heater, window or indicator stalk buttons. There is also a mobile application that can be used as an emergency PIN override, allowing the driver to operate their vehicle without the need to use the button sequence. This is especially beneficial if you have to surrender your car to a valet service or parking, as the immobiliser is activated and not disabled.

The Ghost is an unique and innovative device that operates with the buttons on your vehicle rather than as a separate unit. It's not just an effective deterrent for vehicle theft and vandalism, but it can be used on future vehicles you may own. This makes it a much more cost-effective option than a traditional wheel lock.

Small, weatherproof device

The Autowatch Ghost Immobiliser is a high-tech security device that shields your pride & joy from key hacking and cloning. It also stops ECU swapping. It's a weatherproof, tiny device that communicates directly with your vehicle's ECU over the CAN data bus to disable the engine. It can be plugged into the vehicle without the need for additional wiring and has been extensively tested to ensure that it is compatible with all vehicles. It is also indestructible to jamming devices that are an approach used frequently by thieves to get around existing immobilisers.

The benefit of CAN data over traditional systems is that they work silently. It's not detected by sophisticated RF scanning or code-grabbing technology and is likewise unreadable by traditional diagnostic tools. The Autowatch ghost doesn't produce LED indications and uses the buttons inside your vehicle such as steering wheel or centre console panels to create a unique, changeable disarm sequence. The sequence can be extended by 20 presses for additional security. The iPhone app only allows one connection, and comes with a unique pairing code for the Ghost. All communication between the two devices is secured.

The Ghost stops car thieves from adding an ignition key replacement or replacing the ECU to bypass the immobiliser. The engine can only be started only if a valid PIN has been entered. It is also possible to put it into Valet/Service mode for temporary operation (with defined parameters like a 30mph speed limit) to allow you to transfer your vehicle to a valet service for servicing without the need to enter a pin code.

Tested for each vehicle

The Autowatch Ghost is the world's first aftermarket immobiliser for CAN bus that connects to your vehicle's existing wiring and connects to your engine control unit (ECU). The device is able to intercept signals and prevent your car from starting normally until you enter a custom code. The system can be activated or deactivated by using your smartphone app, without the need for additional wires.

Standard factory immobilisers for vehicles function by using an electronic transponder in the key that transmits an electronic signal to the ECU. The car will start when the correct code is transmitted. If, however, the transponder from another vehicle is used instead, the immobiliser won't recognize it. This makes it possible for the vehicle to be stolen and started. The ghost immobiliser installation immobiliser has been developed by an South African company at the forefront of vehicle security systems technology. It protects your pride and joy from hacking, key cloning and even key theft. Only by physically towing your vehicle away from thieves could they take it away and not be able how to install ghost immobiliser drive the vehicle.

Ghost makes use of the buttons on your car, such as the indicator stalk, steering wheel and door panels to create an individual PIN code that is changeable that must be entered prior to you can use your car. This is done without any extra hardware, such as keys fobs. It can take up 20 to 20 presses. It is also undetectable by devices for diagnosis and transmits radio frequency signals, meaning thieves are not able to use sophisticated RF scanners or code grabbing techniques to determine if a system has been installed.

Contrary to physical anti-theft devices such as clamps or wheel locks, Ghost is covertly integrated into the vehicle so it can't be taken away or disabled by thieves. It's also harder to remove from a car alarm which requires disarming using the use of a button sequence. This makes it a perfect supplement how to become a ghost immobiliser installer a GPS tracker, which can help locate your car after it has been taken.

Override of emergency PIN code

You don't have to look far on social media to find stories or videos about cars that have been stolen using the most advanced technology tools. This includes key-cloning and hacking tools that allow you to start your car without the original key fobs.

The Ghost immobiliser helps combat this and gives you an additional layer of security to stop your vehicle from being stolen if it is targeted by thieves. It is created by creating a unique pin code push sequence from the buttons you have on the steering wheel, door panel and centre console. The unique pin code must be entered along with your original key fob to stop the vehicle from beginning. The unique override pin can be found on a black card which you will receive following your installation. It is simple to remember because there aren't any LED indicators.

The device is hidden in the vehicle's wiring and does not emit radio signals, which means it isn't able to be detected by modern thieves using diagnostic software that is able to identify the security system you have installed. This makes it an excellent alternative to an alarm.

In contrast to other security systems that use a relay inside the engine bay these CANBUS Immobilisers communicate with the vehicle's ECU and BCM via CAN data bus (brand dependant). This allows them to block a vehicle completely, by sending a digital block to the ECU and engine.

It is also possible to connect a separate analog immobiliser, alarm, or tracker with these systems but this must be specified prior to installing the device. They are also compatible with valet/service modes and a great alternative to a tracking device if you take your car to the dealer to address an electrical issue.

Service/Valet Mode

In recent times, there has been an increase in vehicles being stolen without the owners keys. With the ease of access to key cloning equipment and door lock pick sets it is now much easier for thieves to steal your pride and joy. To combat this we are now offering the Autowatch Ghost immobiliser that prevents your car from being driven despite the fact that your keys have been copied or your car was stolen.

It communicates directly to your car's ECU (Engine Control Unit) via the CAN data circuit. It is completely silent since it doesn't use radio frequencies or key fobs. It can't be detected by diagnostics or any other hacking device. It also shields against the possibility of adding the key to a new one or replacing the ECU to bypass the system since only the correct PIN code will allow the engine to start.

The device is hidden within your car and is reached via the buttons on your steering wheel, the centre console and door panels. Before you can start your car, you need to enter a unique and changeable PIN code that can be as long as 20 numbers.

This is the first aftermarket immobiliser for CAN bus to be designed to stop your car being driven away or started without a PIN code being entered first. If the device is activated and you try to drive off it will display an indicator on your dash that will flash on a regular basis for approximately 300m. If you enter your PIN code at this point it will disarm the anti-hijack device and your car will continue to drive just as normal. If you do not enter your PIN at this point, the warning will continue to flash and require a new PIN code every attempt to start your vehicle.