• 글쓰기
• 목록

Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser will protect your valuable possession from theft. This system is discrete and does not require additional key fobs.

The device utilizes buttons on your vehicle (steering wheels doors, door panels, and the centre console) to create a unique pin code sequence that can be modified up to 20 times. This will then allow the vehicle to start.

Simple PIN code change process

Many homeowners are upgrading their security because of the increase in vehicle theft. There are many different types of security gadgets that are sold aftermarket including tracking systems, alarms and immobilisers. They're not all equally effective in protecting your vehicle. A tracking system may help you locate your car if it is stolen, but it will not prevent the crime. Immobilisers, in contrast are exactly what they say on the tin - they shut off your car's engine so that it can't be started. The Autowatch audi rs3 ghost installer immobiliser is one of the most advanced options on the market, making it nearly impossible for thieves to take your vehicle.

The ghost 2 immobiliser installation near me device makes use of the buttons on your car to create an unique sequence that needs to be entered in order for the engine to begin. This can be done via the indicator stalk windows or heater buttons. There is also a mobile application that can be used as an emergency PIN override, allowing the driver to operate their car without the need to use the button sequence. This is a great option for those who want to offer your car to valet parking or for servicing. The immobiliser will remain in operation.

The Ghost is a very unique and ingenious device that works in conjunction with the buttons of your car instead of being a separate device. This means that it's not just a powerful security measure against theft from your vehicle but can also be transferred onto any other vehicles you have, making it more valuable than traditional steering wheel locks.

Small device that is weatherproof

The Autowatch Ghost Immobiliser is a sophisticated security system that safeguards your car from key hacking and cloning. It also stops ECU swapping. It's a small weatherproof device that communicates with the ECU of your vehicle directly through the CAN bus to disable the motor. It can be installed in the vehicle without the need for additional wiring and has been thoroughly tested to make sure it works with all vehicles. It is also indestructible to jamming devices which is a common technique used by car thieves to circumvent the immobilisers in place.

The benefit of using CAN data is that it operates silently in comparison to conventional systems. It is not able to be detected by sophisticated RF scanning and code-grabbing technology, nor can it be identified by conventional diagnostic tools. The Autowatch Ghost doesn't use LED indicators and instead uses buttons on your vehicle, such as the steering wheel, centre console or door panels, to create a unique sequences for disarming. This sequence can be extended 20 or more presses for extra security. The iPhone app permits a single, authorised connection using the pairing code unique to the ghost immobiliser reviews and the communication between the two is secured.

The Ghost also prevents thieves from stealing an additional key or replacing the ECU to bypass the immobiliser to start the engine. The engine will only run if a valid PIN code is entered. It is also possible to put it in valet/service mode to allow for temporary operation (with specified parameters, such as a 30mph speed limit) to allow you to hand your car over to a valet service to be serviced without needing to enter a PIN code.

Each vehicle is tested

The Autowatch ghost 2 immobiliser installation near me is a world-first aftermarket immobiliser for CANbus. It can be connected to the vehicle's wiring and to the engine control unit (ECU). The device intercepts electronic signals to block your car's system from going through its normal initialization process until you enter the passcode you have created. The system can be activated and deactivated by using your smartphone's application without the need for additional wires.

Standard factory immobilisers on automobiles function through a transponder inside the key, which sends an indication to the ECU. The car will start when the correct code is sent. However, if the transponder of a different vehicle is used instead, the immobiliser doesn't recognise it. This makes it possible for the vehicle to be stolen and started. The Ghost immobiliser was created by an South African company at the top of security systems for vehicles technology. It shields you from hacking or key cloning, and even key theft. The only way that a burglar could take your car is physically towing it away and even then, they wouldn't be allowed to drive it.

Ghost uses the buttons in your vehicle including the indicator stalk along with the steering wheel, indicator stalk and door panels to generate a unique PIN sequence that can be changed that must be entered prior to you are able to use your car. This is done without extra hardware, such as key fobs. It can take up 20 to 20 presses. It is also unrecognizable to diagnostic equipment and doesn't transmit radio frequency signals so thieves are unable to utilize sophisticated RF scanning or code grabbing techniques to detect that security systems have been installed.

Ghost is more difficult to remove than car alarms that require disarming with a series of buttons. This makes it a great complement to a GPS tracker, which can help locate your vehicle after it has been taken.

Emergency PIN code override

You don't have to go far on social media to see stories or even videos of vehicles that have been taken by car thieves using the latest technology tools available to them. This includes key-cloning and hacking tools that allow you to start your car without the original keys.

Our ghost immobiliser review immobiliser is designed to combat this, and give you an extra layer of security to keep your vehicle from being targeted by thieves. It generates a unique pin code when pushing the buttons on your steering wheel, door panel and the centre console. This unique PIN has to be entered along with your original key fob in order to stop the vehicle from beginning. The unique override pin can be located on a black card that you will receive after your installation. It is simple to remember since there aren't any LED indicators.

The device is hidden within the vehicle's wires, and doesn't emit any radio signals, so it can't be detected by modern thieves with diagnostic software that can recognise what type of security system you have installed. This makes it an excellent alternative to a tracking device.

In contrast to other security systems, which have an engine relay bay these CANBUS Immobilisers communicate with the vehicle's ECU and BCM via CAN data bus (brand dependant). This enables them to shut down the vehicle completely with the use of a digital block of commands that is sent to both the ECU and the engine.

They can also be linked to a separate alarm immobiliser, tracker or alarm. This should be decided prior to the installation. They are also service/valet mode-compatible and a good alternative to a tracker if you are you are taking your car in for an electrical fault at the dealer.

Service/Valet Mode

In recent times there has been an increase in the number of vehicles that are stolen without owners' keys. It's easier than ever to steal your pride and joy with the availability of key cloning tools and door lock picks. To combat this we have launched the Autowatch Ghost immobiliser that prevents your car from being driven even if your keys were cloned or your car has been stolen.

It connects directly to your car's ECU (Engine Control Unit) via the CAN data loop. It's completely silent since it doesn't use radio frequency or keys fobs. This means that it can't be detected by diagnostics or other vehicle hacking devices. It also protects you from introducing an ECU or key to bypass the system, because only the PIN number allows the engine to start.

The device is hidden within your vehicle and is accessible via buttons on your steering wheel, center console, and door panels. Before you can start your car, you need to enter a unique, changeable PIN code that can be as long as 20 numbers.

This is the first aftermarket CAN bus immobiliser that was designed. It will prevent your vehicle from being started or driven if you don't enter a PIN number first. If you are driving away with the device arming the indicator will flash on your dashboard and flash continuously for approximately 300m. Entering your PIN code will deactivate the anti-hijack. Your car will continue to function just as normal. If you do not enter your PIN at this point, the warning will continue to flash and will require another PIN code for every attempt to start your car.