• 글쓰기
• 목록

Ghost Immobiliser 2

Secures your vehicle from key cloning and prevents thieves from driving your vehicle with original keys. Our latest immobiliser is connected to your vehicle's data network, CAN, and a unique PIN code must be entered in order for the engine to begin.

Contrary to trackers Ghost doesn't transmit any radio frequency signals and can't be detected with diagnostic tools. Ghost doesn't have LED indicators or buttons that could signal its presence in your vehicle or van.

Anti-key Cloning

The audi rs4 ghost installer immobiliser has been designed to combat key cloning and hacking. This device connects to the CAN data network in your vehicle and generates a unique pin code push sequence by using the buttons from the factory on your dashboard and the steering wheel. This will stop the thief from being able to start your vehicle. If the wrong PIN code is entered, your car cannot be started and it will be impossible for them to leave with your joy and pride.

A ghost immobiliser uses new technology that is very difficult for thieves to defeat. The ford fiesta ghost installer immobiliser is different from physical deterrents like wheel locks or steering locks that can be cut, is a discrete electronic device. It's not even identified by thieves since it doesn't emit radio signals and functions in a quiet manner.

The next-generation immobiliser protects your vehicle from a range of threats, including key-hacking, relay attacks and copied copies. It also has the ability to prevent thieves from adding an additional key or replacing your ECU, as it will not allow the vehicle to start without entering the correct PIN code first.

The ghost immobiliser 2 unlike other immobilisers, it does not require a remote control or key fob to operate. It can be deactivated through an app on the smartphone of the driver. This is perfect for when you need to give your car away for valet parking, or maintenance without key fobs.

The Autowatch Ghost-II represents the latest evolution of Ghost immobiliser. It was designed to be as simple and easy to use as possible, but remains as secure as ever. This is achieved by connecting the Ghost-II into the vehicle's data network CAN, which means there are no wires that can be hidden or easily found. It also comes with an inbuilt feature that lets you to disable your Ghost-II by simply connecting to the vehicle's Bluetooth, so you can enter and drive without any hassle.

OBD port hacking

OBD port hacking has become the most recent method employed by professional car thieves. Thieves can access your vehicle's OBD port with little more than an laptop, an app and a few cables, which can be bought online for under PS50. Once they have access, they will be able to do anything they want including resetting your vehicle's fault codes to tuning your vehicle, or getting it stolen in under a minute.

If you have a Ghost immobiliser installed, it will protect your vehicle from theft using this method, by requiring that a unique PIN sequence is entered on the fob of your key in order to start the engine and then drive away. It does this by interacting with the vehicles ECU (Engine Control Unit) via the CAN Data circuit and is totally undetectable to any RF scanning or code grabbing technology. It also comes with a Service/Valet option that will allow your vehicle to start without the need for a PIN code.

You will also need cables with OBD pins, which are connected to the CAN bus. These cables are available on Amazon/Ebay for around PS50. You will also require a cable that has OBD pins connected to CAN Bus. These cables can be bought at Amazon or Ebay for around PS50. The cable must be connected to the wiring harness of your car, for example the radio wiring harness.

Once the hacker has gained a connection to your vehicles OBD port, they are able to send diagnostics to the system at a high baud rate which can cause CAN to crash and block systems in your vehicle from functioning. This can cause your car's engine to stall or even shut down.

No need for additional remotes or key fobs

The car immobiliser is a great piece of anti-theft technology that is utilized by millions of modern vehicles all over the world. Using engine ECU software to prevent cars from starting if a false transponder signal is sent to it an aftermarket immobiliser is an excellent way to safeguard your vehicle.

However, it can be easy for a thief to bypass an immobiliser system if they have access to the code to deactivate it. The battery inside most key fobs can be easily removed by removing it, so a thief can employ a simple tool remove the immobiliser's inner circuit board and replace it with an empty. They'll then be able to start your vehicle.

The TASSA approved Ghost 2 is an immobiliser that doesn't require additional keys or remotes. The immobiliser is directly connected to the vehicle's ECU (Engine Control Unit). This is accomplished by a discrete and silent data loop in the CAN which is not detected by diagnostic tools such as those used by high-tech thieves. It does not include a traditional keyfob, which has an LED indicators, so it's not visible.

There will be occasions that you must deactivate Autowatch Ghost 2 immobiliser 2's automatic security, for example during a valet parking or service job. The ghost installation CAN immobiliser has a dedicated mode for this, referred to as 'Service Mode which is activated by a push of the button on your phone. The car is still operational, but the maximum speed is restricted to 36 mph.

Contact us today to schedule a demonstration at our workshop. A member of the team will provide a full breakdown of how the system works and provide you with owner's manuals, installation certificate, Ghost 2 emergency card and a security guarantee.

Simple Change of PIN Code

Ghost is a next generation device that secures your vehicle without cutting wires or putting in aftermarket key fobs. It connects directly to your vehicle's CAN data network and a personal PIN code is programmed in it by pressing buttons on your steering wheel and the dash. The system prevents engine start and cannot be bypassed because there are no RF signals emitted from the device. This makes it inaccessible to sophisticated RF scanning or code grabbing technology that modern thieves employ.

The PIN code is able to be changed to lock out earlier drivers or include an override code in case you forget the sequence. When installing the installer will show how to accomplish this. The system also has the option of a valet mode that can be used to temporarily disable the pin input sequence so that your garage or mechanic can fix the vehicle without needing to know the pin code. This is a great choice for customers who don't want their PIN sequence to be disclosed, but want to leave their car with valet parking or service.

In contrast to Thatcham products which require additional key fobs to operate, Ghost is a discreet system that uses the buttons in your vehicle to create a unique interchangeable PIN code sequence. The sequence is entered via the app for smartphones, meaning there are no additional LEDs being thrown, and your vehicle is safe from the risk of being disabled by hackers or any other technology.

Tested for each vehicle

A ferrari ghost installer (read on) immobiliser, unlike key fobs which require you to press buttons, is discreetly placed under the dash or on the steering wheel. You won't even know it's there. The device is connected to your car's CAN data networks and a personalised PIN code is programmed using existing buttons on your vehicle. The system will not allow your vehicle to start until this code is entered. This means that thieves cannot clone the keys of your car or access the OBD to hack into it.

Ghost can be utilized in all vehicles including electric cars motorhomes, vans, motorhomes and bikes. It is also extremely versatile and can be set to deactivate in various situations. It can be programmed to enter Valet mode, for example, when the vehicle is transferred to a valet service or parking company. This means that your vehicle can be operated within a specified 30mph speed limit and the ghost immobiliser will activate itself when it returns to your possession.

Another excellent feature is that the device can be reset to your personal PIN code at any time. This is great if you lose the code or in the event that the device becomes unusable.

The device is undetectable by anyone who doesn't even know what it is. It does this by analyzing the buttons on your dashboard and steering wheel and then using the information they transmit to identify the button that was hit. This makes it a secure and reliable security system that cannot be manipulated by RF scanning or jamming, or even a door lock pick set.