• 글쓰기
• 목록

Protect Your Pride And Joy With The Ghost Immobiliser

Secure your prized possessions from theft by using the Ghost Immobiliser. It's discreet and does not require any additional key fobs in order to operate.

The device utilizes buttons on your vehicle (steering wheels doors, door panels and the centre console) to generate a unique pin code sequence that can be changed up to 20 times. This allows your vehicle to start.

Simple PIN code change process

Many homeowners are upgrading their security due to the rise in vehicle theft. There are a variety of aftermarket security devices available including tracking systems, alarms and immobilisers. Not all of them are equally effective at protecting your vehicle. While a tracking system can assist you in locating your car in the case of theft, it does not prevent the crime from occurring in the first in the first place. Immobilisers, however, do exactly what they state on the label - they shut down the motor of your car to prevent it from being started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it nearly impossible for thieves to steal your car.

Using the existing buttons in your car The ghost device generates an exclusive sequence that has to be entered before the car's engine will start. This can be done using the indicator stalk or window buttons. In addition to this option, there is an app for mobile devices that can act as an emergency PIN code bypass and allow the driver to operate the car without having to use the button sequence. This feature is particularly useful if you need to give your car away for valet parking or servicing because the immobiliser will remain activated and not disabled.

The Ghost is an unique and innovative device that works by using the buttons of your vehicle instead of as a separate unit. This means that it's not only a highly effective deterrent against vehicle theft but it can also be transferred to any future vehicles you may own, making it more of an investment than traditional steering wheel locks.

Small, weatherproof device

The Autowatch Ghost Immobiliser is a sophisticated security device that shields your car from key cloning and hacking. It also blocks ECU swapping. It is a tiny weatherproof device that communicates with the ECU of your vehicle directly over the CAN bus, causing it to shut down the motor. It can be plugged into the vehicle without additional wiring and has been thoroughly tested to ensure compatibility with all vehicles. It is also indestructible to jamming devices which is an approach used frequently by thieves to bypass the immobilisers in place.

The benefit of CAN data over conventional systems is that they operate silently. It isn't detected by sophisticated RF scanning or code-grabbing technology and is also unrecognizable by traditional diagnostic tools. The Autowatch Ghost does not employ LED indicators but instead utilizes buttons in your vehicle, like the steering wheel, the centre console, or door ghostinstallations panels, to create a unique disarming sequence. You can even create a sequence that is as long as 20 presses to provide additional security. The iPhone app lets you make a single, authorised connection using the pairing code unique to the ghost immobilise and communication between the two is secured.

The Ghost stops car thieves from adding a new ignition key or replacing the ECU to bypass the immobiliser. The engine will only run if a valid PIN code has been entered. It can also be put in valet/service mode to allow for temporary operation (with specified parameters, such as a 30mph speed limit) to allow you to hand your car over to a valet service for servicing without the need to enter a PIN.

Tested for each vehicle

The Autowatch Ghost is a world-first aftermarket immobiliser CANbus. It can be connected to the wiring of your vehicle and also to the engine control unit (ECU). The device intercepts electronic signals to disable the system of your vehicle from performing its normal startup routine until you input the passcode you have created. The system can be activated and deactivated through your smartphone's application without the need for additional wires.

The standard factory immobilisers work with a transponder which is integrated into the key. This sends a message to the ECU. If the correct code is sent the car will start, but if a transponder is replaced by one from another vehicle the immobiliser won't recognize it. This enables the vehicle to be stolen and started. The Ghost immobiliser was developed by a South African company at the forefront of vehicle security systems technology. It protects you from key cloning or hacking, and even key theft. The only way thieves could take your car is physically towing it away and even then they would not be able to drive it.

ghost 2 immobiliser near me makes use of the buttons on your vehicle, including the indicator stalk along with the steering wheel, indicator stalk and door panels to create a unique, changeable PIN code sequence that must be entered before you can drive. This is performed without the need for additional hardware, such as keys-fobs, and can be up to 20 presses long. It is also inaccessible to diagnostic equipment and does transmit radio frequency signals, which means thieves cannot use sophisticated RF scanners or code grabbing techniques to determine if an installation has been made.

In contrast to the physical devices that prevent theft, such as clamps or wheel locks, ghost immobiliser cost is covertly integrated into the vehicle, so it cannot be taken away or disabled by thieves. It's more difficult to remove from a car alarm which requires disarming via a button sequence. This makes it an excellent complement to a GPS tracker that can assist in locating your vehicle after it has been taken.

Emergency PIN code override

You don't need to look too far on social media to find stories or even videos of vehicles that were stolen by car thieves using the most advanced technology tools available to them. This includes key-cloning devices and hacking devices that allow you to start your car without the original keys.

The Ghost immobiliser helps combat this issue and offers an additional layer of security to prevent your vehicle from being taken when it is targeted by thieves. It works by creating an unique pin code sequence that is triggered by your existing buttons on the steering wheel, door panel and the center console. This unique PIN is entered in conjunction with your original key fob in order to stop the engine from beginning. The unique override pin is found on a black card that you will receive after the installation. It is easy to remember since there are no LED indicators.

The device is hidden within the vehicle's wires, and doesn't emit any radio signals, so it can't be identified by modern thieves using diagnostic software that is able to identify the security system you have installed. This makes it a great alternative to a tracking device.

Contrary to other security systems which use a relay in engine bay, these immobilisers CANBUS communicate through CAN databus (brand dependent) with the ECU and BCM of the car. This allows them to disable the vehicle completely with the use of a digital block of commands to both the ECU and the engine.

It is also possible to connect an analogue immobiliser, alarm or tracker to these systems, but this has to be specified prior to installing the device. They are also compatible with service/valet modes and is a great alternative to a tracker device when you take your car into the dealer to address an electrical issue.

Service/Valet Mode

In recent times, there has been a rise in the number of vehicles being stolen from owners without keys. It's easier than ever to take your joy and pride thanks to the availability of key cloning devices and door lock picks. To prevent this from happening, we now offer the Autowatch Ghost immobiliser that prevents your car from being driven despite the fact that your keys have been cloned or your car was stolen.

It directly communicates with your car's ECU (Engine Control Unit) via the CAN data loop. It is completely silent, because it does not utilize radio frequencies or key fobs. This means that it can't be detected by diagnostics or other vehicle hacking devices. It also protects you from adding a new ECU or key to circumvent the system, since only the PIN code allows the engine to be started.

The device is hidden in your vehicle and is accessed by existing buttons on your steering wheel, centre console and door panels. A unique and reversible PIN code sequence that can be as long as 20 digits has to be entered before you can start your car.

This is the first aftermarket CAN-bus immobiliser that has been designed. It can prevent your vehicle from being driven or even started when you don't enter a PIN code first. If the device is in armed and you attempt to drive off it will display an indicator on your dash which will flash continuously for about 300m. If you enter your PIN code during this time, it will disable the anti-hijack device and your car will continue to operate in the normal way. If you do not enter your PIN at this point, the indicator will keep flashing & will require a new PIN code every attempt to start your vehicle.