• 글쓰기
• 목록

Protect Your Pride And Joy With The Ghost Immobiliser

Protect your pride & joy against theft with the ghost immobiliser tracker Immobiliser. It's discreet and doesn't require additional key fobs.

The device uses buttons on your vehicle (steering wheels doors, door panels and the centre console) to create a unique pin code sequence that can be altered up to 20 times. This will then authorize the vehicle to start.

Simple change of PIN code

Many owners are upgrading their security due to the rise in vehicle theft. There are many kinds of security products that are available for sale, from tracking systems to alarms and immobilisers. However they do not all are equally efficient in protecting your vehicle. While a tracking device can assist in finding your vehicle in the event of theft, it does not prevent the crime from happening in the first in the first place. An immobiliser, on other hand is exactly what says on the tin: it disables your car's engine so that it cannot be started. The Autowatch local ghost immobiliser installer immobiliser is one of the most advanced options available on the market, making it nearly impossible for thieves to steal your vehicle.

By using the buttons that are already present in your car, the ghost device creates an exclusive sequence that has to be entered before the car's engine will start. This can be done using the indicator stalk, window or heater buttons. There is also a mobile app that can be used as an emergency PIN override, allowing the driver to operate their car without having to use the button sequence. This is a great solution if you want to give your car to valet parking or for servicing. The immobiliser will stay active.

The Ghost is an innovative and unique device that works with the buttons on your vehicle rather than as a separate unit. This means that it's not only a highly effective security measure against theft from your vehicle but can also be transferred to any future vehicles you own, making it much more of an investment than traditional steering wheel locks.

Small, weatherproof device

The Autowatch ghost immobiliser is a high-tech security system that guards your car from key cloning, hacking and ECU swapping. It's a weatherproof and small device that communicates directly with your vehicle's ECU via the CAN data bus to disable the engine. It can be placed in the vehicle without the need for additional wiring and has been thoroughly tested to ensure that it works with all vehicles. It is also resistant to jamming devices that are an approach used frequently by thieves to bypass existing immobilisers.

The advantage of using CAN data is that it runs silently when compared to conventional systems. It isn't detected by sophisticated RF scanning or code-grabbing technologies and is likewise unreadable by traditional diagnostic tools. The Autowatch Ghost does not employ LED indicators but instead utilizes buttons in your vehicle, like the steering wheel, the centre console, or doors, to create an unique sequence of disarming. You can even make this sequence as long as 20 presses to provide additional security. The iPhone app allows only one connection, and comes with a unique pairing code for the Ghost. All communication between the two devices is protected.

The ferrari ghost installer stops car thieves from adding a new ignition key or replacing the ECU in order to bypass the immobiliser. It will only allow the engine to run when the correct PIN code is entered. It is possible to operate temporarily in valet or service mode (with parameters set such as a 30mph speed limit) which means you can hand your car to valet or service without needing to enter a code.

Tested for each vehicle

The Autowatch ghost immobiliser fitting is the world's first aftermarket CAN bus immobiliser that connects to the existing wiring in your vehicle and connects to your engine control unit (ECU). The device intercepts signals to stop your car from starting normally until you enter a specific code. The system can be activated or deactivated via your smartphone's app without the need for extra wires.

Standard factory immobilisers for automobiles function through a transponder inside the key that sends an electronic signal to the ECU. The car will start when the correct code is transmitted. However, if a transponder from another vehicle is used instead, the immobiliser won't recognize it. This enables the vehicle to be stolen and started. The Ghost immobiliser has been developed by an South African company at the top of security systems for vehicles technology. It protects you from key cloning or hacking, and even key theft. Only by physically towing your car away could a thief take it away and not be able to drive it.

Ghost utilizes the buttons of your vehicle, including the indicator stalk along with the steering wheel, indicator stalk and door panels to create an unique, changeable PIN code sequence that must be entered prior to you can drive. It does this without additional hardware, like a keyfob. It can take up to 20 presses. It is also inaccessible to diagnostics equipment and doesn't transmit radio frequency signals, which means thieves are unable to use sophisticated RF scanning or code-grabbing technology to discover that a security system has been installed.

Ghost is more difficult to remove than car alarms that require disarming with a series of buttons. This makes it a great complement to a GPS tracker, which can help locate your car after it has been stolen.

Emergency PIN code override

You don't have to look very far on social media for stories or videos of cars that were stolen using the latest technology tools. Key-cloning devices, for instance, and hacking tools that allow thieves to start the vehicle with your original keys.

The Ghost immobiliser helps combat this issue and offers an additional layer of security to prevent your vehicle from being taken in the event of being targeted by thieves. It creates a unique pin code push sequence from the buttons you have on the steering wheel, door panel, and the center console. The unique pin code is entered alongside the original key fob to stop the engine from starting. The unique override pin can be found on a black plastic card that you will receive after the installation. It is simple to remember since there are no LED indicators.

The device is hidden inside the vehicle's wiring and does not emit radio signals, therefore it isn't able to be detected by modern thieves using diagnostic software that can identify the security system you have installed. This makes it a great alternative to the tracking device.

In contrast to other security systems, which have a relay inside the engine bay, these CANBUS Immobilisers connect with the car's ECU and BCM via the CAN data bus (brand dependent). This allows them to shut down a vehicle completely, by sending a digital block to the ECU and engine.

These systems can also be linked to a separate analogue alarm, immobiliser or tracker. This should be decided prior to installation. They are also fully service/valet mode compatible and a good alternative to a tracker you are taking your car in for repair at the dealers.

Service/Valet Mode

In recent years, there has seen an increase in the number of cars being stolen from owners without keys. It is more easy than ever to steal your pride & joy thanks to the availability of key cloning devices and door lock picks. We've developed the Autowatch Ghost Immobiliser to combat this. It blocks your vehicle from being driven even if you keys have been cloned.

It communicates directly with your car's ECU (Engine Control Unit) via the data loop of CAN. It is completely silent as it does not use radio frequencies or key fobs. This means it cannot be detected by diagnostics or other car hacking devices. It also protects you from adding the new ECU or key to circumvent the system, since only the PIN code allows the engine to be started.

The device is hidden in your car and can be accessible via buttons on your steering wheel, centre console and door panels. Before you can start your car, you must enter a unique and reversible PIN number that is up to 20 digits.

This is the first aftermarket CAN bus immobiliser to be created that will stop your car from being started or driven away if a PIN code isn't entered first. If you are driving away with the device in motion, an indicator will appear on your dashboard that will flash continuously for approximately 300m. Entering your PIN code will disable the anti-hijack. Your car will continue to function normally. If you don't enter your PIN code at this point, the indicator will keep flashing & will require a new PIN code for every attempt to start your car.