• 글쓰기
• 목록

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are easy to maintain and are durable and long-lasting. They are not susceptible to decay or rust as aluminum and timber.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will help avoid unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great amount of damage to your home, making it very hazardous and possibly fatal. It is crucial to take the time to ensure that you're doing all you can to ensure that your windows are in good repair.

Single-pane windows are relatively easy to replace and generally fit into old frames very easily. If you have double glazed window repairs near me-paned windows which are held together by internal beading, it will be harder to remove and replace the panes that were previously in use. In this instance, it is necessary to buy plastic spacers to make sure that the new pane fits into the window frame.

Wearing protective eyewear and thick gloves is a must when you are planning to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes to ensure that any shards fall onto the fabric and not on the floor and could be trampled.

Once the glass has been removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to stop drafts and water from entering the property until a professional comes out and repair the window. This also serves as a barrier to prevent any intruders from getting into your home. If the gap is particularly large, you may want to consider using a security door that has an integrated window as it will provide the best of both worlds.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash windows. However, over time, they are susceptible to a range of issues like sagging. A sagging uPVC window can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to sag it's crucial to act fast to prevent the problem from becoming worse.

Repositioning the hinges could help fix a window that is sagging. You'll first need to open the windows so you can reach the frame. Then, you can remove the hinges at the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, close your window and test it for fit. If you're happy with the fit, you can tighten the screws to ensure that they stay in position.

If you can't reposition the hinges, you may need to replace the seal. As time passes, rubber seals lose their elasticity and dry out, which causes them to loosen. If this happens, it's essential to replace the seal as fast as you can to ensure that your uPVC windows remain watertight and secure from draughts.

UPVC handles can also loosen. Most often, this is caused by screws that have become loose over time. However, it could be due to the fact that the handle mechanism has been worn out. Luckily, it's not difficult to repair the loose uPVC window handle yourself. First, you'll need to close the window and then perform a test fit. The corners of the sash need to align with the casing joint. If it isn't you can use a screwdriver to loosen the handle. Then, you can turn the mechanism to position.

3. Water Leaks

It is crucial to take action if you wake up every morning to find mouldy walls and floors that are wet. The leaks of water from windows do not only lead to the degradation of your home's structure but also hamper your efforts to control the temperature in your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a fairly simple fix and should be undertaken by any competent DIYer. Based on the severity of the issue the old caulking might need to be removed before a new layer is applied. It is crucial to remember that when it is about uPVC window repairs, you should not be tempted to 'over-caulk' as this will only make the area harder to clean and can decrease the efficiency of your energy usage.

Check that any drainage holes are free of debris inside them and ensure that the sill pan is properly angled to drain away from the window. In more serious situations, you might have to consider replacing the window.

Moldy sills and rotten ones are also signs of water leakage. This mold thrives in damp environments and can quickly spread across the house.

It is also important to keep in mind that if the leak is coming from between the glass of your double glazed window repairs near me glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sagging. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and open with ease it could be hinges that are at fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Most households in the UK will have either top hung or side hung uPVC windows that are hinged and, just like any mechanical component they can wear down over time. It's easy to change a window hinge however it is easier if someone else helps you to hold the frame.

It is also important to ensure that the uPVC hinges are opening and closed in the right direction. This can be done by looking for the arrows on each hinge, this indicates the direction in which the window should be opened.

The issue can be caused due to opening the window in the wrong way or by a poor installation at the factory. Sending us a picture via our website is often enough to solve the issue. We are happy to give assistance.

It is also crucial to ensure that the hinges are lubricated on a regular basis. This can be done by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window to operate and close more smoothly. It can also lower the chance of windows getting stuck and stop corrosion. This should be done at least once a year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window repair near me.

5. Draughts

Draughts in upvc windows can be caused by various factors. The hinges may also become disaligned as a result of wear, causing a gap where the sash and frame meet. If they are damaged beyond repair, it could be required to realign them. The interlock, which is located on the hinge side of the window and can also be misaligned, and again it may be possible to just give them a thorough clean, however in certain cases, it may be necessary to have them replaced.

These seals are susceptible to wear and tear or be damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window repair near me with low-emissivity glass. this will help in regulating indoor temperatures and again will reduce the risk of draughts.

Another method of reducing the amount of draughts is to use a draught-excluder. These are typically fabric tubes filled with a filler, which can be put on top of your window sill. These will keep your home warm by blocking out cold air.

Your upvc windows can keep providing excellent insulation and security in your home by performing regular maintenance and repairs. It is important to remember that all windows eventually get worn out and it could be more cost-effective to simply replace them instead of fixing them. If you encounter any issues with your window made of upvc it is recommended to speak with a professional immediately.