• 글쓰기
• 목록

How to Replace the Replacement Key Battery For the saab 9-3 key 9-3

Saab owners have a distinct set of steps to take to add another key. This requires an electronic handheld computer, referred to as Tech-2, to be used by the dealer. A new key and transponder need to be bought and then programmed into the car.

It is recommended to rotate your keys so that one doesn't get worn out more quickly than the other. This will keep your keys in pristine condition.

Replacement Case

The new key fobs aren't like the old Saab keys. They have electronics that make it difficult to copy. This has made theft of cars significantly more difficult than 20 years ago. However, it has made the replacement key for saab 93 of lost keys a much more costly endeavor.

Every owner of a 9-3 Saab should have at a minimum two functioning keys. If one is lost it costs a fortune to add another to the car, as it requires replacing the CIM module and reprogramming the locking cylinders. Dealers charge between $100 and $200 for this.

There are ways to avoid these high costs. Some parts dealers will use the code of an old key to cut a new metal blade for a fraction of the price of the dealer. The key, however, must be the same as the original to work correctly in your vehicle.

You can also change the case yourself by following these steps. You will need to have an open-faced screwdriver and patience. Using the screwdriver, slowly tear the plastic away and separate the emergency key from the case. Once you have the case opened, take out the electronics and place them inside the new case. Make sure you insert the correct badge and key back in the case too.

Replacement Battery

The Saab 9-3 replacement battery is a cheap component that can be quickly and easily replaced. This YouTube DIY video user Cyclone Cyd explains how to replace the battery in the remote key fob in just four steps. This tutorial can be used for any modern-day saab key fob however, the procedure may differ slightly.

This button is usually located close to the saab key programmer logo on the back of the fob. The button is usually found on the back of your fob, just below the Saab Logo. Use a flathead to insert the screwdriver into the tiny hole in this button. This should be enough to open the fob's case so that you can replace the battery.

After the new battery CR1632 is installed, you can reassemble the remote key fob, and then program it to your car. The entire process shouldn't be more than an hour. It's a simple process that doesn't require any special tools.

The procedure is a little more complicated if you've lost your key, but still possible. The dealer must first read the VIN of the vehicle and order an additional TWICE module and key blade with the proper unique code. The dealer will then have to program the key using MDI, a brand new software tool.

Replacement Key Fob

The key fob is a device that locks and unlocks your car, it has a battery within. The batteries last for a period of, and they will eventually go out of service. This is a common problem that happens with all cars and the good thing is that you can replace the batteries in a majority of key fobs without replacing the entire case. Amazon sells replacement fobs that already have all the electronics in place. It is easy to open the case and replace the batteries. You will need to remove the emergency key before you replace the batteries. To accomplish this, simply insert the screwdriver of a small flat head into the slot that is in the middle of the. The screwdriver should be moved around the case until it is split open, making it simple to remove.

If you're planning to replace your keys, have an extra set on hand. This will save you lots of money. If you have an additional key, ask the dealer to cut the key and program it for your vehicle. This is less expensive than purchasing a brand new key fob.

If you don't have a spare, it is possible to add another key to your car, but this will require a lot of research and effort. The cost for adding a second key is a few hundred dollars, and it also requires programming of the car's computer. This can be done by a professional, but it's a costly option for the majority of owners.

Replacement Ignition

Contrary to earlier Saab automobiles, the current SAAB 9-3 models are equipped with a much more sophisticated alarm system that is dependent on a coded keys. This means that should you lose only one working key, acquiring an additional one could be extremely expensive as the car has to have a specific computer module installed and it also must be specially designed to accept a different key. The majority of locksmiths aren't able to do this and even dealers can charge several hundreds of dollars just to program the new key!

If you've lost the only working key, a dealer will replace the computer in your car (known as the CIM or saab 9-3 key TWICE) in order to make the replacement, and will charge top dollar for it. We can reprogram the existing EEPROM on your car's computer to make it prepared for a new key. This will save you more than 50% on the price you'd pay the dealer.

If you've been a long-time owner of a 03-11 SAAB 9-3, you likely realize that the ignition key isn't very robust. They can be extremely sticky, and the buttons are known to fall off of them from time to time and you should think about getting a replacement if yours isn't working properly. It's not so difficult as it may seem to replace the ignition key. With the appropriate tools, it could be accomplished in a short time.