• 글쓰기
• 목록

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. They do not rot or rust like aluminum or timber.

It is essential to clean and oil UPVC windows and doors regularly. This will reduce repair costs as well as increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home, and could even be fatal. It is essential to take the time to ensure that you are doing everything you can to keep your windows in good condition.

For single pane windows, it can be relatively simple to replace windows, and the new one will generally fit within the frame of the previous one easily. However when you have double pane windows that are anchored by internal beading it will be more difficult to take out the panes that are in place and replace them with new ones. In this situation, it is necessary to purchase plastic spacers to help the new pane fit into the window frame.

If you're planning attempt to remove the glass panes yourself, it is essential to wear the proper safety gear such as gloves that are thick and eye protection. You should also lay down a dropcloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not on the floor and could be trampled.

It's a great idea cover the gap with tape after the glass is removed. This will keep water and drafts from entering your property until a professional comes out to fix the window. This will also act as a barrier, deterring any intruders to gain access to your home. If the distance between the window and the door is significant, you may need to consider security screens that includes windows. This will provide the best of both.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash windows. However, over time, they can suffer from a variety of issues like sliding. A sagging window in uPVC could cause issues with light, draughts and even security. It's important to take action immediately if you notice your uPVC windows are sagging.

Repositioning the hinges can help fix a window that is sagging. To accomplish this, you'll need to open the window so that you can access the frame. After that, using the screwdriver, you'll be able to take off the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after having repositioned your hinges. If you're happy with the fit, you can tighten the screws until they remain in position.

If you are unable to move the hinges, you might need to replace the seal. Over time rubber seals can lose their elasticity and become dry, which causes them to lose tightness. It is crucial to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

uPVC handles may also become loose. Often, this is caused by screws that have come loose over time. However, it could occur because the handle mechanism has been worn out. It's relatively simple to fix a loose uPVC hand. You'll first need to close the window and then perform an experiment fitting. The corner joints of the sash should be aligned with the casing joint. If it doesn't, you can use a screwdriver to loosen the handle and then reverse the mechanism back into position.

3. Water Leaks

It is essential to take action if you get up each morning to find a smoky wall and wet floors. Leaks of water from windows can cause structural damage to your home and affect your ability to regulate the temperature inside your home. Most often, uPVC window repairs leaks are caused by damaged or missing sealant.

This is an easy fix that can be done by anyone who is a DIYer with the skills. Depending on how serious the problem is, the old caulking may have to be removed. It is crucial to keep in mind that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk' as this will only make the area harder to clean and reduce your energy efficiency.

It is crucial to make sure that the drainage holes are clear of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious cases, you may need to replace the window.

Mold spots and rotten sills are also signs of water leakage. This fungus thrives in conditions of dampness and can spread quickly throughout the house.

It is also important to keep in mind that if the leak is coming from between the glass of your double-glazed windows, it's more likely to be an issue with the glass seal rather than the frame or sagging. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and open in a breeze it could be the hinges that are at fault. Any competent DIYer can replace these in a matter of minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that use hinges and, just like any mechanical component they will wear out over time. It is essentially a very simple process, but it's easier with someone else to help you hold the frame up.

Make sure that the uPVC hinges open and close in the correct direction. You can check this by checking for the arrows on each hinge. This indicates which way the window should open.

The problem can be caused either due to opening the window in the wrong way or a faulty installation in the factory. This can often be resolved by sending us a photo through our website and we will be happy to give you suggestions.

It is also crucial to ensure that the hinges are lubricated regularly. This can be accomplished by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window repair operate and close more easily. It can also lower the risk of a window sticking and prevent corrosion. Ideally, you should do this once a year. WD40 and other solvent-based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few different things. The hinges can also be disaligned as a result of wear, creating an opening between the frame and sash. These can be easily repaired by giving them a good clean, but if they are beyond repair it may be necessary to get them re-aligned or replaced. The second is the interlock, which is located on the hinge side of the window, can be misaligned. Again, it's possible to just give them a thorough clean, however in certain cases, it may be necessary to have them replaced.

The next common reason for draughts is window seals, these are prone to wear or damaged over time, and let air escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity lenses. This will help regulate indoor temperatures and lessen draughts.

One of the most effective ways to reduce draughts is by using an draught excluder. These are typically fabric tubes that are filled with some sort of filler and can be put on the windowsill on top. These will help to block out cold air and keep your home warm and cosy!

Your windows made of upvc will continue to provide excellent insulation and security in your home with a little regular maintenance and repairs. It is crucial to recognise that all windows have a lifespan and they may reach an point at which it is more cost-effective to replace them rather than fix them. If you encounter any issues with your window repairs made of upvc it is recommended to speak with an expert immediately.