• 글쓰기
• 목록

How to Replace a UPVC Window Handle

If your window handle made of upvc is damaged, don't be concerned. Replacing a window handle made from upvc is a relatively simple task and can be accomplished in just a few steps.

Whether you have a cranked or inline espagnolette style window handle, they all feature a square spindle that protrudes from the back plate and is inserted into the locking mechanism.

Identify the lock type and handle

Over time, window handles and locks could become damaged or lose their functionality. It is possible to fix this issue without replacing the entire uPVC unit. One of the first things to do is to determine the kind of lock and handle you have, as this will determine what replacement double glazing window parts you'll need.

You can identify the type of handle by examining the base. There will be the screw or pin that is holding the handle to its base. If the screw is gone it could be a sign the handle has separated from the base. If the handle has been split in the middle and no longer grips onto the spindle, this can be a sign that it is in need of replacing.

There are many uPVC handles that are available, but the Espag handle is the most well-known. They are usually fixed with two bolts and the spindle is connected to the locking mechanism in the frame of the window. These handles are used on uPVC tilt and turn windows.

Another type of uPVC window handle is the Cockspur handle. These are similar to the Espag handle, however they have a low projection from the frame. These handles are typically used on older uPVC window frames.

Finally, there are also Venetian window handles, which are similar to the Espag handle but they have flat bases that allow them to be placed in a flush position with the frame. These are a great choice for homeowners looking for an elegant, stylish handle that will blend in with their uPVC window frames. The handles are also available in a large variety of colors to match any decor.

Find the spindle's measurement.

Before ordering a new handle, it's crucial to know how the old one handle is attached. This will tell you how it is tight or loose and whether it will fit correctly into the window frame. This can be done by identifying the handle type and determining the spindle's measurement. The spindle is the steel shaft that connects the handle to the lock in the window frame. It's available in different sizes and the current industry standard being 8mm. Older handles could have a 9mm cross-section so it's crucial to determine the cross-section of the old one to ensure you get the right size replacement.

There are a variety of window handles. The most commonly used are the inline Espagnolette handles and the cockspur handles. These handles are used to operate a locking system inside the window. They use shootbolt rods to lock the window after it has been closed. Depending on the type of handle they are held in place using screws or pins.

You can purchase Upvc handles that are replacement online or in most DIY stores. They come in a range of finishes and are suitable for new and replacement windows. For extra security, they can be either key-locking or a non-locking fire escape.

To remove your old handle open the window and unscrew the screws which hold it in place. Be careful not to damage the screws and put them in a container for later use. After the screws have been removed, gently pull out the handle and measure from the base to the top of the spindle. This will give you the necessary information to purchase the correct replacement. The spindle of the handle is the shaft of steel that connects it to the lock gearbox within the window frame.

Remove the handle that was previously used

The replacement of the uPVC window handle is a straightforward task and usually will take no more than five minutes using the right tools. The first step is to determine the lock type and handle, which will help you determine the best replacement. After that, weighing the spindle will ensure that the new handle is a suitable for the job. The handle that was used previously needs to be removed and replaced with the new.

The majority of uPVC handles come with inline Espagnolette handles. They have a central spindle which slots into the locking mechanism on the window. They are typically easily removed, but may require force if they get stuck. The handle is usually held in place by two screws which can be removed using the help of a screwdriver. It is also possible to remove pins based on the kind of handle.

After you have removed the screws, you can remove the handle you were using previously. The top of the base plate will be visible when the handle is in an open position, revealing two screws that you can unscrew. There's also small silver or another colour sticker that has to be removed if in place.

You can now screw into the new handle using the screws that came with the old handle. Make sure that the handle is in an open or locked position, and then align the screw holes to the ones on the window. After you've done this, you can replace the caps on the screws and test the new handle to ensure that it functions properly. The replacement of a uPVC window could be a simple and quick task, but it's crucial to ensure you complete the task correctly.

Fit the new handle

It's time to install your new handle if you have successfully removed the old one from the frame. Begin by locating the screws and then removing them out using your screwdriver. After the screws are removed, place them in a safe place before moving on to the next step.

Then, insert the new spindle into the handle by lining it up with the existing hole and screwing it into. Make sure that you align the holes in the handle with the holes in the window frame. You should use a screw similar in length to the one used before, or it could cause the handle to not being secure.

uPVC Espag handles come with a 7mm square spindle that turns the lock mechanism that is attached to the window. This kind of handle can be present in the majority of modern uPVC windows. uPVC Cockspur (also known by the name Cotswold) handles feature an extended, curved nose that is secured to the frame's outer or cross member of the transom bar. They are often found on older uPVC Windows.

Once the new handle is installed, it is important to ensure that it operates correctly by locking and unlocking the Window panes replacement a few times. If everything goes according the plan, the replacement uPVC handle should be securely attached and working smoothly. If not, the steps listed above will help you identify any problems and fix it quickly. Bridgewater glass replacement window can help you when you're experiencing issues with your uPVC handles or any other home improvement that is glazed. Our glaziers are able to repair or replace different window frames and handles. This makes us an excellent choice for double glazing.

Test the new handle

In time and with regular use, uPVC handles and locks may be damaged and wear and tear. This can leave them less effective and secure and therefore it is important to replace them as quickly as possible. It's also a good option to consider when you upgrade your windows. Changing your lock mechanism and handle will help to maintain your new windows' integrity.

There are a variety of uPVC window handles. Some are secured with pins or screws, whereas others have blades that slide into the lock mechanism. Each lock type has its own way to replace it, so you have to know which one you have.

Espag window handles are the most well-known type, and are usually found on the latest uPVC windows. These handles have a spindle that extends from the handle and into the lock gearbox and, when you open the windows, it activates the locking mechanism. These handles are also easy to remove. However, you must be careful not to damage the mechanism or the handle.

Cockspur window handles are another popular option for uPVC windows. They're secured by a spur that is snagged onto the striker plate in the shape of a wedge on the frame, and when you shut or tilt the window, it activates the locking mechanism. This type of handle can be more difficult to fix than other types, but it's an excellent choice for most homes.

Venetian window handles are secured with two bolts. They have a slim projection from the frame, in contrast to the Espag handle. They're ideal if you want a flush handle that blends in with your uPVC windows. They're an excellent choice for commercial and residential buildings.