• 글쓰기
• 목록

Protect Your Pride And Joy With The Installing Ghost Immobiliser - Te.Legra.Ph, Immobiliser

ghost immobiliser problems Immobiliser will protect your prized item from theft. This system is discreet & does not require additional key fobs in order to operate.

The device utilizes buttons on your vehicle (steering wheels doors, door panels, and the centre console) to create a unique pin code sequence that can be changed up to 20 times. This then authorizes the startup of your vehicle.

Simple PIN Code Change Process

Many homeowners are upgrading their security due to the rising number of vehicle thefts. There are a myriad of aftermarket security devices available, from tracking systems to immobilisers and alarms. However there are a few that are equally effective in protecting your car. While a tracking system can assist you in locating your vehicle in the event of theft, it does not stop the crime from happening in the first place. An immobiliser, on the contrary, does exactly what it says on the label: it shuts off the engine of your vehicle so that it cannot be started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it nearly impossible for thieves to steal your vehicle.

The ghost device uses the buttons on your car to generate an unique sequence that needs to be entered in order for the engine to start. This can be accomplished using the indicator stalk or window buttons. There is also a mobile application that can be used as an emergency PIN override, which allows the driver to operate their car without the need to use the button sequence. This option is particularly useful if you need to surrender your car for valet parking or servicing since the immobiliser will remain active and not deactivated.

The Ghost is a unique and innovative device which is used in conjunction with the buttons on your vehicle instead of being a separate device. It is not only an effective deterrent for vehicle theft however, it can be used on future vehicles you may own. This makes it a much better investment than a traditional wheel lock.

Weatherproof, tiny device

The Autowatch Ghost Immobiliser is an advanced security system that safeguards your vehicle from key hacking and cloning. It also prevents ECU swapping. It's a weatherproof, tiny device that communicates directly with your vehicle's ECU over the CAN data bus to shut down the engine. It can be installed in the vehicle without any wiring, and has been thoroughly tested to ensure compatibility with all vehicles. It also is resistant to jamming devices, which are a common technique used by thieves to get around immobilisers.

The advantage of using CAN data is that it operates in a silent manner compared to traditional systems. It can't be detected by sophisticated RF scanning or code-grabbing technologies and is also unrecognizable by traditional diagnostic tools. The Autowatch Ghost doesn't use LED indicators but instead utilizes buttons in your vehicle, such as the steering wheel, centre console, or door panels, to create a an unique sequence of disarming. You can create a sequence that is as long as 20 presses to increase security. The iPhone app permits a single, authorised connection with the pairing code unique to the ghost immobiliser 2 and communication between the two is encrypted.

The Ghost also stops car thieves from using an additional key or replacing the ECU to bypass the immobiliser and start the engine. The engine will only run only if a valid PIN has been entered. It is possible to operate temporarily in the Valet/Service mode (with parameters set, such as a 30mph speed limit) which means you can hand your car to a valet or service without needing to enter an entry code.

Every vehicle is tested

The Autowatch Ghost is a first-of-its-kind aftermarket CANbus immobiliser. It can be connected to the wiring of your vehicle and to the engine control unit (ECU). The device intercepts electronic signals to block the system of your vehicle from performing its normal initialization process until you enter a custom passcode. The system can be activated or deactivated using your own smartphone application without the need for wires.

The standard factory immobilisers work by using a transponder that is embedded in the key. It transmits a message to the ECU. The car will start if the correct code is transmitted. If, however, the transponder from another vehicle is used instead, the immobiliser will not recognise it. This enables the vehicle to be stolen and started. A South African company that is at the forefront of vehicle safety systems technology developed the Ghost immobiliser. It shields your pride and joy from hacking, key cloning and even key theft. Only by physically towing your vehicle away from thieves could they take it away, and they would still not be able drive it.

ghost 2 immobiliser installation uses buttons on your vehicle, such as the indicator stalk, steering wheel, and doors, to generate unique PIN codes which must be entered to use your car. This is done without any extra hardware, such as key fobs. It can take up 20 to 20 presses. It is also inaccessible to diagnostic equipment and doesn't transmit radio frequency signals, so thieves are not able to make use of sophisticated RF scanning or code-grabbing technology to detect that the security system has been installed.

Unlike physical anti-theft devices like clamps or wheel locks, Ghost is hidden within the vehicle so it can't be disabled or removed by thieves and is even more difficult to get rid of than a car alarm, which requires disarming with a button sequence. This makes it a great alternative to a GPS tracker that can assist in locating your car after it's been stolen.

Override of emergency PIN code

You don't need to look too far on social media to see stories or even videos of vehicles that were stolen by thieves using the most advanced technology tools available to them. This includes key-cloning devices and hacking tools that allow thieves to start the vehicle without your original keys.

The range rover vogue ghost installer immobiliser was designed to combat this and offer an additional layer of security in order to keep your vehicle from being targeted by thieves. It is created by creating a unique pin code sequence that is triggered by the buttons you have on the steering wheel, door panel and centre console. This unique PIN has to be entered together with your original key fob in order to prevent the vehicle from getting started. The unique override pin is on the black card you will receive following your installation. It's easy to remember because there aren't any LEDs.

The device is hidden inside the vehicle's wiring and does not emit radio signals, which means it can't be detected by modern thieves with diagnostic software that can identify the security system you have installed. This makes it a fantastic alternative to an electronic device for tracking.

Contrary to most security systems that use an engine relay bay, CANBUS Immobilisers communicate with the vehicle's ECU and BCM via the CAN data bus (brand dependant). This allows them to disable the vehicle completely by sending the use of a digital block of commands that is sent to both the ECU and the engine.

These systems can also be connected to a separate analogue alarm, immobiliser or tracker. This must be specified prior to the installation. They also work with service/valet modes and an excellent alternative to a tracking device when you bring your vehicle to the dealer for repairs to an electrical problem.

Service/Valet mode

In recent times there has been an increase in vehicles that are stolen without owners' keys. It's now easier than ever before to steal your pride and joy thanks to the availability of key cloning tools & door lock picks. We've developed the Autowatch Ghost Immobiliser to combat this. It prevents your vehicle from being driven even if your keys have been copied.

It connects directly to your car's ECU (Engine Control Unit) via the data loop of CAN. It's completely silent since it doesn't utilize radio frequencies or key fobs. It can't be detected by diagnostics or any other hacking device. It also shields against the possibility of adding a new key or replacing the ECU to bypass the system since only the correct PIN code will allow the engine to start.

The device is hidden in your car and is accessed by existing buttons on your steering wheel, the centre console, and door panels. A unique and reversible PIN code sequence of up to 20 digits must be entered before you can start your vehicle.

This is the first aftermarket CAN bus immobiliser to be developed that can prevent your car being moved away or even started in the event that a PIN code hasn't been entered first. If you're driving away with the device in motion, an indicator will appear on your dashboard that will flash continuously for around 300m. Entering your PIN code will deactivate the anti-hijack. Your car will continue to function just as normal. If you do not enter your PIN at this time the indicator will continue to flash and require a new PIN code every time you attempt to start your car.