• 글쓰기
• 목록

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain and are durable and long-lasting. As opposed to aluminium and timber they don't rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will help prevent unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large amount of damage to your home, making it very hazardous and possibly fatal. It is crucial to take the time to ensure that you're doing everything you can to keep your windows in good condition.

Single-pane windows are relatively simple to replace, and they will usually fit into the frames that were previously in use very easily. If you have double-paned windows that are joined by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this situation, you will need to find some plastic spacers to help the new pane to fit correctly into the window frame.

If you are going to try to remove the glass panes yourself it is important to wear the proper safety gear such as gloves that are thick and protective eyewear. You should also lay down a dropcloth prior to you begin working on the window panes, so that any shards fall onto the fabric, not onto the floor and could be trampled under.

It's a great idea to tape the gap once the glass has been removed. This will prevent drafts and water from getting into your property until a professional arrives to repair the window. This will also provide a barrier to prevent any criminals from getting into your home. If the gap between the door and the window is significant, you may want to use a security screen that also includes windows. This will give you the best of both.

2. Sagging

Upvc windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows with sash. In time, they could develop a number of problems, including sliding. A sagging window can cause problems with light, draughts and even security. It's crucial to act as soon as you realize that your uPVC windows are sliding.

Repositioning the hinges can help fix a window that is sliding. To accomplish this, you'll need open the window to get to the frame. Then, using the screwdriver, you'll be able to take off the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after you've moved your hinges. If you're happy with the fit, tighten the screws to ensure that they remain in the right place.

If you are unable to reposition the hinges, you might need to replace the seal. Rubber seals can dry out and lose their elasticity over time, leading them to loosen. It is essential to replace your seal as quickly as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles can also loosen up. Often, this is caused by screws that have come loose over time. However, it could also happen because the handle mechanism has been worn out. It's relatively easy to repair a loose uPVC handle. First, you'll need to shut the window and perform a test fitting. The joint at the corner of the sash should align with the joint on the casing. If it does not, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

It is important to act if you awake each day to discover mouldy walls and wet floors. Water leaks through windows can cause structural damage to your home, and impact your ability to regulate the temperature of your home. The most common cause for leaks in uPVC windows is that the sealant around the frame is damaged or not present.

This is a relatively easy fix and should be undertaken by any skilled DIYer. Depending on the severity of the issue the caulking used previously may need to be removed before a fresh layer is applied. It is crucial to remember that when it comes to uPVC window repairs you should not be tempted to apply too much caulk' as this will only make the area harder to clean and could reduce your energy efficiency.

It is important to check that any drainage holes are clear of debris and that the sill pan is placed correctly so that it drains away from the window. In more severe cases, you may need to replace the window.

Mold spots and rotten sills are another sign of water leakage. This fungus thrives in damp conditions and is able to quickly spread throughout the house.

It is also important to note that if the leakage is coming from between the glass in your double glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sagging. A upvc window repair specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open or if it opens with an ease. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Most households in the UK will have top-hung or side hung uPVC windows that have hinges and like any mechanical part they can wear down over time. It is very easy to change a window hinge however it is easier if someone else helps hold the frame.

Check that the uPVC hinges are closed and open in the proper direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window a certain way or by improper installation in the factory. Sending us photos via our website will often solve the issue. We are always happy to provide advice.

Regular lubrication of the hinges is essential. This can be accomplished by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It can also prevent corrosion and reduce the risk of sticking. This must be done at a minimum once a year. WD40 and other solvent-based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different things. First, the hinges because of wear and tear, can become misaligned, this can cause an opening to appear where the sash meets the frame. This can be easily repaired by giving them thorough clean, however if they are beyond repair it could be necessary to get them realigned or replaced. The interlock may be disaligned. This happens on the hinge's side and might require to be cleaned. In certain instances it might be necessary to replace these.

The next common cause of draughts is the window seals, these can become worn down or damaged over time, and let air escape through the gaps. Replacement of these with high-quality weatherstripping is a good way to keep draughts at bay. Another option is to replace the upvc window with low-emissivity glass, which will help regulate indoor temperatures and will lessen the possibility of draughts.

One of the most effective ways to reduce drafts is to use a draught excluder, these are usually fabric tubes which are filled with a kind of filler. They can be put on top of your windowsill. They can help stop cold air from entering and keep your home warm and cozy!

With a bit of regular maintenance and repairs your windows made of upvc will provide a great level of security and insulation for your home. It is crucial to recognize that all windows have a life span and there may come the point when it's more cost-effective to replace them rather than fix them. If you are experiencing problems with your upvc windows, it's recommended to seek help from a professional as soon as you can.