• 글쓰기
• 목록

Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser will safeguard your prized property from theft. This system is discrete and does not require any additional key fobs.

The device uses buttons on your vehicle (steering wheels doors, door panels and the centre console) to generate a unique pin sequence that can be modified up to 20 times. This will then allow your vehicle to begin.

Simple process to change the PIN code

With the increasing rate of vehicle thefts, many owners are looking to improve their security. There are many kinds of aftermarket security devices including tracking systems, alarms and immobilisers. They're not all equally effective in protecting your car. While a tracking system may help you find your car in the event of theft, it will not stop the crime from occurring in the first in the first place. Immobilisers, on the contrary, do exactly what they state on the tin - they shut down the motor of your car so that it isn't able to be started. The autowatch ghost installers Nottingham Ghost immobiliser is one of the most advanced options on the market, making it virtually impossible for thieves to steal your vehicle.

The ghost device uses the buttons on your car to generate an unique sequence that needs to be entered to allow the engine to begin. This can be accomplished using the indicator stalk or window buttons. There is also a mobile application that can be used as an emergency PIN override, which allows the driver to operate their car without having to use the button sequence. This is especially useful when you need to give your car away for valet parking or servicing, as the immobiliser will remain active and not deactivated.

The ghost alarm installation near me is an innovative and unique device that works with the buttons of your vehicle instead of as a standalone unit. This means that it is not just a highly effective security measure against theft from your vehicle but it can also be transferred to any future vehicles you may own, making it much more of an investment than a traditional steering wheel lock.

Weatherproof tiny device

The Autowatch bmw x6 ghost installer immobiliser is a high-tech security device that protects your pride and joy against key cloning, hacking and ECU swapping. It is a small weatherproof device that communicates with the ECU of your vehicle directly over the CAN bus to disable the motor. It can be installed in the vehicle without any wiring, and has been thoroughly tested to ensure compatibility with all vehicles. It also is resistant to jamming devices that are the most common method used by car thieves to circumvent existing immobilisers.

The benefit of using CAN data is that it runs silently compared to traditional systems. It isn't detected by sophisticated RF scanning and code-grabbing technology, nor can it be identified by conventional diagnostic tools. The autowatch ghost installers birmingham Ghost doesn't use LED indicators but instead utilizes buttons in your vehicle, such as the steering wheel, centre console, or doors, to create a unique disarming sequence. The sequence can be extended 20 presses for additional security. The iPhone app only allows one connection, and comes with a unique pairing code for the Ghost. All communication between the two devices is protected.

The Ghost also prevents car thieves from using the key to a new car or replacing the ECU to bypass the immobiliser to start the engine. It will only allow the engine to run only if the correct pin code is entered. It can also be put into Valet/Service mode for temporary operation (with specified parameters, such as a 30mph speed limit) to allow you to give your car to a valet service or for maintenance without having to enter a PIN code.

Tested for each vehicle

The Autowatch Ghost is the first aftermarket immobiliser for CAN bus that is able to be connected to your vehicle's existing wiring and connects to your engine control unit (ECU). The device detects electronic signals to block the system of your vehicle from performing its normal initialization process until you enter the passcode you have created. The system can be turned off or on by using your smartphone app, without the need for additional wires.

The standard factory immobilisers function by using a transponder, which is built into the key. It transmits a message to the ECU. If the correct code is transmitted the car will begin, but if a transponder is replaced by one from another vehicle the immobiliser won't recognize it. This makes it possible for the vehicle to be started and stolen. The Ghost immobiliser was developed by an South African company at the top of the line in vehicle security technology. It protects your vehicle from key cloning, hacking and even key theft. The only way a thief could take your car is by physically towing it away, and even then they would not be able to drive it.

Ghost makes use of buttons in your vehicle, such as the indicator stalk, the steering wheel, and door panels, to create a unique PIN code that must be entered to use your vehicle. This is done without any additional hardware, like key fobs. It can take up to 20 presses. It is also inaccessible to diagnostic equipment and does transmit radio frequency signals, which means thieves are not able to use sophisticated RF scanners or code grabbing techniques to determine if an installation has been made.

Unlike physical anti-theft devices like clamps or wheel locks, Ghost is covertly integrated into the vehicle so it can't be disabled or removed by thieves. It is more difficult to remove than a car alarm, which requires disarming via an action sequence. This makes it an excellent alternative to a GPS tracker, which can help locate your car after it's been taken.

Override of emergency PIN code

You don't need to look far on social media sites to find stories or even videos of vehicles that have been stolen by thieves using the latest technology tools available to them. This includes key-cloning and hacking tools that allow you to start your car without the original key fobs.

The Ghost immobiliser helps combat this and provides you with an additional layer of security to prevent your vehicle from being stolen if it is targeted by thieves. It generates a unique pin code by pushing the buttons on your steering wheel, door panel and centre console. The unique pin code is entered along with the original key fob to prevent the engine from getting started. The unique override pin can be located on a black card that you will receive after your installation. It is easy to remember because there are no LED indicators.

The device is hidden in the vehicle's wires and does not emit radio signals, so it isn't able to be identified by modern thieves using diagnostic software that can detect the type of security system you have installed. This makes it a great alternative to an alarm.

Contrary to most security systems, which have a relay inside the engine bay, these CANBUS Immobilisers connect with the vehicle's ECU and BCM via CAN data bus (brand dependent). This enables them to shut down the vehicle completely by sending a digital block of commands to both the ECU and the engine.

It is also possible to connect an analogue immobiliser, alarm or tracker with these systems, but this has to be specified prior to installing the device. They are also compatible with valet and service modes, and are an excellent alternative to a tracking device when you bring your vehicle to the dealer to address an electrical issue.

Service/Valet mode

In recent years, there has seen an increase in the number of cars being stolen with the owners' keys. It's easier than ever before to steal your pride & joy with the availability of key cloning tools & door lock picks. We have developed the Autowatch Ghost Immobiliser to combat this. It blocks your car from being driven, even if you keys have been copied.

It connects directly to your car's ECU (Engine Control Unit) via the data loop of CAN. It is completely silent as it does not use radio frequencies or key fobs. This means it cannot be detected by diagnostics or any other car hacking devices. It also protects you from adding an ECU or key to circumvent the system, since only the PIN code allows the engine to be started.

The device is hidden in your vehicle and is accessible via buttons on your steering wheel, the centre console and door panels. A unique and reversible PIN code sequence up to 20 digits needs to be entered before you are able to start your vehicle.

This is the first aftermarket immobiliser for CAN bus to be created that will stop your car from being started or driven away without a PIN code being entered prior to. If the device is in armed and you attempt to drive away, it will display an indicator on your dash that will flash regularly for around 300m. If you type in your PIN code during this time, it will disable the anti-hijack and your car will continue to drive in the normal way. If you do not enter your PIN in this moment the indicator will continue to flash and Car stolen With ghost immobiliser require a new PIN code each time you attempt to start your vehicle.