• 글쓰기
• 목록

Repairs to uPVC Windows

uPVC is a great option for modern homes. They are durable, long-lasting and easy to maintain. They don't rot or rust like aluminum and timber.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will save you from unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it can cause a great deal of damage to your home, making it very dangerous and potentially fatal. It is essential to ensure that your windows are in good shape.

For single pane windows, it can be relatively simple to replace them, and the replacement will generally fit within the frame that was previously installed easily. However when windows with double panes are held in place by internal beading, it will be more difficult to take out the old panes and put in new ones. In this case it is essential to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

Wearing eye protection and thick gloves is a must if you plan to remove the glass yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes, so that any shards fall onto the fabric and not onto the floor, where they could be trampled.

After the glass has been removed and the glass is removed, it's a good idea to cover the gap with packaging tape or duct tape to prevent water and drafts from entering the property until a professional comes out and fix the window. This will also act as a barrier, preventing any intruders from gaining entry into your home. If the gap is particularly large, you may want to consider using a security door that has an integrated window as this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber sash windows. However, over time they can suffer from a variety of issues like sagging. A sagging uPVC windows could cause issues with light, draughts, and even security. It is crucial to act as soon as you discover that your uPVC windows are sagging.

To fix a window that is sagging you can try repositioning the hinges. To do this, you'll have to open the window so that you can access the frame. Then, using an screwdriver, take off the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, close the window and check for an appropriate fit. If you're satisfied with the fit, you can tighten the screws to ensure they remain in place.

If you cannot reposition the hinges, you may have to replace the seal. Rubber seals can dry out and lose their elasticity with time, causing them to loosen. It is important to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles can also loosen up. Most often, this is caused by screws that have become loose over time. However, it can be due to the fact that the handle mechanism has worn out. Fortunately, it's easy to fix a loose uPVC window handle yourself. The first step is to close the window and then perform an experiment fit. The joint at the corners of the sash should align with the joint on the casing. If it doesn't then you can use a screwdriver to loosen the handle, and then turn the mechanism back into its original position.

3. Water Leaks

It is crucial to take action if get up each morning to find mouldy walls and floors that are wet. Water leaks from windows can not only cause degrading of the structure of your home but also hinder your efforts to regulate the temperature inside your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or not present.

This is a simple fix that can be completed by any DIYer who has the ability. Depending on how severe the issue is, old caulking might need to be removed. It is essential to remember that when it comes to uPVC window repairs you should not be tempted to 'over-caulk and then make the area more difficult to clean and decrease the efficiency of your energy usage.

It is important to check that the drainage holes are free of debris and that the sill pan has been angled correctly so that it drains away from the window. In more serious situations, you might need to consider replacing the window.

Moldy sills and rotten ones are another sign of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely that the issue is more related to the seal, not the frame. It is also possible to be fixed by an uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open or it opens in the breeze. They can be easily repaired by any skilled DIYer and are usually completed in a matter of minutes.

Almost every household in the UK will have top-hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they are susceptible to wear and tear over time. Changing a window hinge is essentially a very simple procedure, but it is easier to do when you have a person to help hold the frame up.

It is also important to verify that the uPVC hinges are opening and closed in the right direction. You can do this by looking for the arrows on each hinge, this shows which way the window should be opened.

Window hinges that aren't working properly could be caused by improperly opening the window in a certain way or due to improper installation in the factory. Sending us a picture through our website can often solve the issue. We are more than happy to offer advice.

It is also essential to grease the hinges on a regular basis. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window to operate and close more easily. It can also lower the possibility of a window getting stuck and stop corrosion. This should be done at least once a year. WD40 or other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by different things. The hinges may also become disaligned as a result of wear, creating gaps where the sash meets frame. They can be repaired by giving them a good clean, but in the event that they are beyond repair it might be necessary to have them aligned or replaced. The second is the interlock, which is on the hinge side of the window repairs, may also be misaligned, and again it is possible to give them a good clean, but in some instances it could be necessary to have these replaced.

The seals may wear out or become damaged over time, allowing air escape. Replacing these with high-quality weatherstripping is a good way to stop draughts. Replace the upvc windows with low-emissivity glass. This will help control indoor temperatures and lessen the possibility of draughts.

Another method of reducing drafts effectively is to use a Draught-excluder. These are usually made of fabric tubes filled with a filler that can be hung over your window sill. They will keep your home warm by blocking out cold air.

With a little maintenance and repair windows made of upvc will continue to provide an excellent level of security and insulation for your home. It is crucial to keep in mind that all windows will eventually become worn out, and it could be more cost-effective to simply replace them rather than repair them. If you encounter any issues with your upvc window it is recommended to speak with an expert as soon as you can.